Price:
US$259.99
- Size: Micro
- Version: RTF
- Type: Tinywhoop
- VTX: Analog
Precise details:
Note: 1. The drone default to the angle mode. You can connect betaflight configurator and install more modeï¼
2. Update: The drone has been bound to the radio’s default factory settingsï¼
3. You can connect to the simulator only via Bluetooth.
Sub250 highly recommends the new Whoopfly16 RTF Kit in 2023! It will be a brilliant choice for new FPV beginners to start flying. Comes with a Whoopfly16 Analog Elrs 2.4gHz FPV drone, MicroRadio Elrs 2.4gHz transmitter, and Goggles 01.
Whoopfly16 is an inverted pusher with a protective frame FPV drone. It combines the characteristics of a short wheelbase for smooth indoor flight and the protection ring has strong protection characteristics.
Sub250 MicroRadio Elrs 2.4gHz remote control with a maximum transmission power of 500mW, 8 channels of ultra-low latency, replaceable 18650 batteries, and support type-c charging.
The FPV Goggles 01 use dual antennas to receive picture signals at the same time, support card recording DVR, built-in 3.7V 2000mAh battery that can be used for up to 2.5 hours, support USB fast charging, and one-key search frequency point. The multi-function menu design makes the operation more convenient.
Specification:
Brand: Sub250
Model: Whoopfly16
Item Name: 1.6 Inch 1S Whoop FPV Racing Drone RTF
| Whoopfly16 Analog Drone | Product name: Whoopfly16 Analog Elrs 2.4 Frame: WF16 Wheelbase size: 75mm Flight control system: Redfox A1 F4 5A 4in1 1S AIO FC MCU: STMF411 IMU: ICM42688-P OSD: BetaFlight OSD w/AT7456E chip ESC: Redfox A1 4IN1 5A ESC VTX: VTX 5.8G 200mW Lens: Caddx Ant eco Propeller: Gemfan 1608-3 Antenna: 5.8g copper tube antenna 70mm ELRS Version weight: 35.2g Receiver: ELRS 2.4G (SPI) |
|
SUB250 MICRORADIO ELRS 2.4G Radio Transmitter |
Product name: MicroRadio Size：147*135*71mm (Not including antenna) Weight：223g Adapted Drone Type: Multirotor, Airplane Frequency band：2.4GHz ISM Input voltage：6.6-8.4V Antenna interface： SMA Power：100/250/500mW Channel：8 channel Charging interface： USB-C Firmware upgrade： Support Bluetooth joystick： Support Note: Not including Remote Controller’s Batteries (2X 18650 Batteries) |
| Sub250 Goggles 01 | Product name: Goggles 01 Resolution：800*480px Size of screen: 4.3 inch Size: 155mm*144mm*113mm Built-in Batteries: 3.7v / 2000 mAh Working Time: 2.5 hours Weight: 314.6g |
Whoopfly16 RTF Basic Teaching
-Open the bag
-Take out the radio/ goggles /drone/ and batteries
-Take out two 5.8g antennas and install them on the goggles
-Mounting the single antenna on the radio
-Long press the radio power button to power the radio first
-Long press the goggles power button to power
-Plug in the battery to power the drone
-The batteries can be recharged via Sub250-CW1 charger
-The drone has been bound to the radio’s default factory settings
-Just place all the levers at the top and the throttle at the bottom
-Pull the leftmost lever down, and the drone is unlocked
-The drone default to the angle mode. You can connect betaflight configurator install more mode
-Short press the menu button of goggles to enter the one-click search mode
-The goggles will automatically select best signal channel according to the signal strength
-Wearing your goggles to start flying now!
Package Included:
1 x Whoopfly16 Analog Elrs 2.4g FPV Drone
1 x MicroRadio Remote Controller
1 x Sub250 Goggles 01
1 x Sub-CW1 charger
2 x Sub250 530mAh 90C 1S batteries
4 x 1608-3 Propellers
1 x Phillips screwdriver
1 x L-type Allen screwdriver (1.5mm)
1 x Portable Storage Bag