Description:
Fighter – 130 is a marvelous drone intended for breathtaking FPV racing. The quadcopter comes with an 80C LiPo battery, which means that it can accelerate to the highest speed in no time. The 3K full carbon fiber chassis and lateral boards are thick enough to cope with considerable impact in case of a crash. More importantly, you are able to adjust the PID and OSD settings via the transmitter and BetaFlight ground station respectively, which is extremely convenient.
Main Features:
● Furious flight – 80C LiPo battery, 1106 7500KV motor, 76mm two-blade propeller
● Minicube F3 6DOF FC with OSD, compatible with CleanFlight and BetaFlight firmware
● Remote PID adjustment and configuration of OSD via BetaFlight ground station
● 600TVL camera presents the 5.8G real-time FPV within the range of about 150m
Specifications:
Wheelbase: 130mm
Size: 112 x 112 x 30mm
Weight: 70g ( not including battery )
Frame material: 3K carbon fiber
Brushless motor: 1106 7500KV
Brushless ESC: 4-in-1 BLHeli – S 10A
Propeller: 76mm two-blade
Camera: 600TVL CMOS
Video transmitter: 5.8G 40CH 25mW NSTC
Flight controller: Minicube F3 6DOF with OSD
Buzzer size: 13 x 13mm ( with integrated LED )
Battery: 7.4V 550mAh 80C LiPo ( included )
Flight time: 3 – 5 minutes
Minicube F3 6DOF Flight Controller
Size: 27 x 27 x 5mm
Mounting hole spacing: 20mm
Processor: STM32F303 MCU
IMU: MPU6000 SPI
OSD display: battery voltage, RSSI, flight mode, flight duration, aircraft name etc.
Firmware: OMNIBUSF3 BetaFlight 3.1
Minicube 4-in-1 BLHeli – S 10A ESC
Size: 27 x 27 x 5mm
Mounting hole spacing: 20mm
Firmware: BLHeli – S 16.5
Processor: BB2 48MHz chip
Power supply: 2 – 3S LiPo
Continuous current: 4 x 10A
Burst current: 4 x 15A ( up to 10 seconds )
BEC output: 5V 1A
Programmable: yes
BetaFlight passthrough ready
DShot600 ( default ) ready
Product Safety Disclaimer:
We do not accept any responsibility or liability for misuse of this or any other product. All our products are extensively tested to comply with rigorous and strict QC standards. For certain products (e.g. toys, knives, etc.), we recommend proper supervision as we cannot be held liable for misuse or accidents.
Small Parts Disclaimer:
These toys contain small parts, not for children under 3 years in case of swallowing or choking . We do not accept any responsibility or liability for misuse of this or any other product.
