Description:
Eaglet – 85 85mm mini FPV racing drone is a brilliant racer which has a great potential to bring you the unprecedented flight. You just need to attach a 2 – 3S LiPo onto it, then, you are able to enjoy piloting the drone at a high speed with maximum immersion. More importantly, you are allowed to adjust the parameters via BetaFlight ground station or with the transmitter, know the real-time RSSI and brake whenever you like.
Main Features:
● Efficient flight because of the 85mm wheelbase, aerodynamic canopy, and 1104 7500KV brushless motors
● Minicube F3 flight controller supports CleanFlight and BetaFlight; self-balancing, semi-self-balancing and manual mode
● OSD and ESC settings can be adjusted remotely by the BetaFlight ground station and the transmitter respectively
● BLHeli – S ESC uses DShot600 ( default ) to ensure the anti-interference and fast responses for freewheeling
● 600TVL CMOS camera works with the CM27T 5.8G 48CH 25mW VTX, offering you the real-time FPV within 150m
Specifications:
General
Wheelbase: 85mm
Size: 113 x 114 x 52mm
Weight: 60g ( not including battery )
Frame: 3K carbon fiber
Brushless motor: 1104 7500KV
Brushless ESC: 4-in-1 BLHeli – S 10A
Propeller: 1.9 inch five-blade
Camera: 600TVL CMOS
Video transmitter: CM275T 5.8G 48CH 25mW
Flight controller: Minicube BetaFlight F3 6DOF
Buzzer: with LED light
Compatible receiver: DSM / SBUS / PPM
RSSI: support
Minicube F3 6DOF Flight Controller
Size: 27 x 27 x 5mm
Mounting hole: 20 x 20mm
Processor: STM32F303 MCU
IMU: MPU6000 SPI
OSD: BetaFlight OSD
Firmware: OMNIBUSF3 BetaFlight 3.1 DShot
Minicube 4-in-1 BLHeli – S 10A ESC
Size: 27 x 27 x 5mm
Mounting hole: 20 x 20mm
Power supply: 2 – 3S LiPo
Continuous current: 4 x 10A
Burst current: 4 x 15A ( up to 10s )
BEC output: 5V 1A
Firmware: BLHeli – S 16.5
BetaFlight passthrough ready
DShot600 ready ( default )
Programmable: yes
Recommendation:
Power source: 7.4V 500mAh 50C ( not included )
Estimated flight time: 3 – 5 minutes
Product Safety Disclaimer:
We do not accept any responsibility or liability for misuse of this or any other product. All our products are extensively tested to comply with rigorous and strict QC standards. For certain products (e.g. toys, knives, etc.), we recommend proper supervision as we cannot be held liable for misuse or accidents.
Small Parts Disclaimer:
These toys contain small parts, not for children under 3 years in case of swallowing or choking . We do not accept any responsibility or liability for misuse of this or any other product.
