Price:
US$0.00
- Type: Digital Signal
- Brand: Eachine
- Camera Resolution: Without
- RC Drone Spare Parts: FPV Receiver
- Frequency: 5.8GHz
- Applicable User: Universal
- Interface Type: SD/TF
- Application: Pilot
- Power: 3W
Precise details:
Features
1. Low Latency & High Res: 40-50ms + 720P@120FPS/1080P@90FPS HDMI-compatible.
2. Strong Signal & Expandable: 5.8G 8812EU + 800mW, supports self-soldered dual adapters.
3. Dual Compatibility & Plug-and-Play: Works with OpenIPC/RubyFPV, pre-flashed for hassle-free use.
4. Dual Power Supply: 5V USB OTG/7-26V DC, fits portable/drone power sources.
5. All-in-One Practical: Built-in DVR + AP Mode + Ground Station Menu, multi-scene use.
Description:
|
SBC board |
Radxa zero 3w |
|
Wireless Adapter |
|
|
5.8Ghz |
|
|
HDMI-compatible 1080P@90FPS/ 720P@120FPS |
|
|
Delay |
40 to 50 mS @ FPS120 |
|
RF Power |
800mW Max (with telemetry) |
|
Interface |
Mini HDMI-, Micro HDMI-(through cable), DC5.5×2.1mm |
|
Input Voltage |
5V(USB OTG) or 7-26V(DC Socket),3S is recommend |
|
Power consumption |
About 3.5W |
|
Memory |
1G RAM or 1G RAM + 32G Micro SD |
|
Size |
80*40*24mm(without ANT) |
|
Weight |
75g (with ANT) |
|
Default settings |
Channel:161 Resolution:1080P@60FPS |
Interface:
Wiki:
https://github.com/OpenIPC/sbc-groundstations/releases/
https://rubyfpv.com/hardware.php
https://etcher.balena.io/
This is a HDMI- receiver for Sphere link digital FPV system, and it’s compatible with OpenIPC and Rubyfpv.
If you choose the version with 1G RAM + 32G Micro SD, the OpenIPC image will be burned. You just need to plug in the HDMI- display or FPV glasses, power it on, set the channel, and you’re ready to go.
If you choose the version with 1G RAM , you need to prepare an 8G or larger micro SD card, and then use some software (like BalenaEtcher) to burn the image to the SD card.
Software and firmware image download:
https://etcher.balena.io/
https://rubyfpv.com/downloads.php
https://github.com/OpenIPC/sbc-groundstations/releases?page=1
The image brings a Ground station Menu. The menu provides options to modify air and ground settings.
The button functions are as follows:
CH+/CH – Cycles through menu items for new firmware of OpenIPC or change channel for some other firmware
BACK/QA3/OK – Adjusts selected values
AP – AP mode for old firmware of OpenIPC, Quick Action 2 for RubyFPV
REC – Recording for OpenIPC, Quick Action 1 for RubyFPV
When AP Mode(WIFI) is enabled in the Menu, your can connect to the AP with you PC or phone
SSID: OpenIPC GS,
password: openipcgs
DVR can be accessed in many ways:
If flashed to an SD card: the SD card can be inserted into a PC and you will see a /dvr folder.
If connected via AP mode: video files can be accessed via the new dvrUI at http://radxa-zero3.local.
If connected the receiver to you home network: either via the dvrUI above, or a Sambaclient, and can be accessed with user/password root/root or radxa/radxa.
It is equipped with an 8812EU adapter, with a maximum power of 800mW for telemetry.
At the same time, it’s allowing for the soldering of a second adapter (8812AU) by self-provide. but with dual adapters, the temperature will be much higher.
Package Included:
1 x 5.8GHz Eachine Sphere link FPV Receiver
2 x Cables